Start-Smart

                                               

Literature(outdoor)

Literature(indoor)

Start-Smart Vehicle Access Systems (SSO {Outdoor} + SSI {Indoor} Models)

Start-Smart  KEYLESS IGNITION   SSO {Outdoor}
Keypad: Indestructible sealed metal piezo keypad  (for aggressive marine environment)
Why a metal piezo keypad?    RELIABILITY!!  This keypad is completely sealed and potted to protect it from corrosion and failure.   Piezo buttons are electronic---they have NO MOVING PARTS!

Wired relay model  SSO-115W:  wired relay module connects to ignition switch to start vehicle.  Sealed and potted to protect the relays from the environment.

Anti-Theft wireless relay model  SSO-115WWL: wireless relay is hidden in ignition, starter or fuel pump circuit.  START-SMART automatically enables the wireless relay when a code is accepted.  Once the wireless relay is enabled, the circuit has power and the device can start the engine using the wired relay.   Hidden wireless relay prevents the engine from being “hot wired” and stolen. This model includes BOTH wired and wireless relays.
    All models are available in both 12VDC (LV)  or  24VDC (MV) versions

Features:
·   Code input enables device  (4, 5, or 6 digit codes acceptable)
·  Start/Stop vehicle (engine or electric) directly from keypad - NO KEYS!
·  Inexpensive system to eliminate keys and keep untrained operators off the equipment
·  Can be set for diesel or gasoline mode. 
Diesel mode enables glow plugs - delays START for 17 seconds
· SSO model indestructible metal piezo keypad for extremely tough and outdoor applications
·  All user code in/out programming is done directly on the device keypad by programmer
·  Can NOT be upgraded,  for advanced logging features refer to 105 model                                                                                                                                                         
·  Auto time out:   Adjustable from keypad in 1 minute increments
            Example:   If  5 minutes is set, device will REMAIN enabled for 5 minutes AFTER you press STOP to stop the engine.   This means that during the 5 minutes, you only need to press START to re-start the engine.   If you wait longer than 5 minutes, then the device will time out and you must re-enter code once again to enable the unit. 
How it works:
·  Driver enters good code to enable device  (4, 5, or 6 digit codes acceptable)
·  TEXT and ENABLED  LEDs light indicating code acceptance
·  Driver presses START button to start engine, presses STOP button to stop engine (or auto log off from seat switch)