| SKU |
Product |
Description |
|
KEY LVC
|
12v Voltage Converter
|
Keytroller 12v Voltage Converter. This Converter works as a Noise Filter for High Electrical Noise Applications
|
|
MVC
|
18v to 30vdc Voltage converter
|
Keytroller 18v to 30vdc Voltage converter
|
|
HVC
|
36v-55v High Voltage Converter
|
Keytroller 36v-55v High Voltage Converter (Converts 36v-55v to 12v)
|
|
UHVC
|
60-72v Ultra-High Voltage Converter
|
Keytroller 60-72v Ultra-High Voltage Converter
|
|
AMBRE-RE
|
Adjustable Mounting Bracket
|
Keytroller Adjustable Mounting Bracket (2.5 round on both ends)
|
|
AMBR-RECE
|
Adjustable Mounting Bracket 6" x 2"
|
Keytroller Adjustable Mounting Bracket (2.5 round on one end and 6 x 2 rectangular bracket on other end) This bracket works very well with the LCD 501/502 Systems
|
|
AMBC-RECE-3
|
Adjustable Mounting Bracket with Rectangular Overhead Guard Clamp
|
Keytroller Adjustable Mounting Bracket with Rectangular Overhead Guard Clamp(6 x 2 Rectangular on one end and Rectangular Overhead Guard Clamp on other end)
|
|
AMBC-RE-3
|
Adjustable Mounting Bracket With Round Overhead Guard Clamp 3
|
Keytroller Adjustable Mounting Bracket With Round Overhead Guard Clamp (2.5 round on one end and 3 Circle Overhead Guard Clamp on other end)
|
|
KEY-BSTR
|
Booster Relay
|
Keytroller 105 Booster Relay. This Booster Relay is for Vehicles which have switching of current that is over 20 AMPS
|
|
D9C
|
Cover for RS232 Connector
|
Protective Plastic Cover for RS232 Connector
|
|
NSFIL
|
Electrical Noise Filter
|
Keytroller Electrical Noise Filter (Standard on all LCD 501 Systems)
|
|
HYD-HPT
|
Hydraulic Pressure Transducer
|
Hydraulic Pressure Transducer. Allows custom setting of overload hydraulic pressure on the sensor. When pressure exceeds setting, output occurs to KEYTROLLER device with custom (seconds) warning, logging and shut down options. Note: this sensor can also be set up to record 2nd hour meter reading for loaded vs unloaded condition on the lift
|
|
TRA-12VDC
|
Keytroller 12v Transformer
|
Keytroller 12v Transformer Converts 115v to 12v (Required for Desktop Demonstration of Keytroller Systems)
|
|
AMBREC-RECE
|
Keytroller Adjustable Mounting Bracket Suction Cup
|
Keytroller Adjustable Mounting Bracket (Suction Cup on one end and 6 x 2 Rectangular Bracket on other end)
|
|
LCD-BSTR
|
LCD 501-502 Booster Relay
|
LCD 501-502 Booster Relay. This Booster Relay is for Vehicles which have switching of current that is over 20 AMPS
|
|
MHMAGS
|
Magnetic Speed Sensor Mounting Kit
|
Magnetic Speed Sensor Mounting Kit
|
|
KEY-RA
|
Relay Assembly
|
Keytroller 105 Series Replacement Relay Assembly
|
|
RSBWS
|
Seat Belt Assembly
|
Keytroller Seat Belt Assembly
|
|
RSBS-EXT
|
Seat Belt Extension
|
Need a longer seat belt
|
|
RSBWSK
|
Seat Belt Warning System
|
Stand Alone Seat Belt System with internal switch and alarm.
|
|
SCAP
|
Super Capacitors
|
Super Capacitors-----designate whether it is for LCD501 or Keypad105 unit. This capacitor bank is used on IC powered vehicles that have voltage drop when starting the engine.
|
|
RF-KEYPOS
|
Terminator Wireless transceiver
|
Terminator Wireless position transceiver mounted on forklift. When forklift approaches, ATS3-BERP wall transceiver emitting signal, signal received by device on forklift and will shut down ignition in programmable # of seconds if signal is constant. Adjustable position warning from 3'--75' from wall mounted ATS3-BERP transceiver.
|
|
ATS3-BERP
|
Terminator Wireless wall mounted transceiver
|
Terminator Wireless wall mounted transceiver (specify wall or battery powered). This system will warn an operator with flashing warning LEDs that he has entered a forbidden area. If he does NOT turn around and leave this area then the KEYTROLLER can be set to shut down ignition in a programmable # of seconds after the signal is received, preventing any vehicle from entering restricted areas. Many sensor transmitters can be mounted throughout the plant and will permeate concrete walls to be read on the other side by vehicles coming the other way.
|
|
FLED
|
Warning LED Light
|
Keytroller Warning LED Light (Can be used in conjunction with FSA or as stand alone warning light)
|
|
EMAG
|
Wheel Magnet
|
Replacement Wheel Magnet for Magnetic Speed Sensor
|
Categories
