KEYENABLER Keypad (w/wireless relay anti-theft series) This model can be upgraded to include logging and advanced fuctions SM or IM) otherwise you may want to refer to the SIMPLE KEYTROLLER series units for cost reduction.

Product Downloads:

PowerPoint	VIEW POWERPOINT
Product Details	VIEW BROCHURE/PDF

KEY105B Kit includes:

• Keypad with keypad code entry (RFID reader is optional - specify type: Standard, HID-Prox, HID i-class)
• Wireless relay module installed in ignition or fuel pump circuit to prevent "hot wiring".
• KND model includes BOTH wired and wireless relays - anti-theft and allowing starting from keypad
• SM model includes external shock/memory module with RS232 serial port
• IM model includes internal memory module with RS232 serial port on the keypad

Features:

• Code or RFID card reader enables device (code expiration for training purposes on SM and IM models)
• Start/Stop vehicle (engine or electric) directly from keypad - NO KEYS!
• Simple PASS or FAIL automation of operator daily checklist (shutdown on FAIL press for checklist)
• Schedules maintenance by date or hour meter reading - re-settable from PC software
• Connections (on SM model) to sense: speed, seat switch, seat belt or low oil/high temperature
• Impact sensing on SM model is standard
• Optional 105M model indestructible metal piezo keypad for extremely tough applications
• Optional 105F model for low profile flush keypad
• All user code in/out programming can also be done directly on the device keypad by programmer

Programming and downloading methods:

• Direct computer connection at RS232 serial port
• CYBERKEY data transfer system (for both programming and downloading event data from multiple devices)
• CYBERWIRE wireless radios

How it works:

• Driver inputs good code (or flashes RFID card) to enable device
• Wireless relay is enabled - driver uses ignition key or lever switch to start vehicle
• On KND (dual relay devices) - driver presses START key to start vehicle, STOP key to stop
• On SM and IM models, events are time/date/operator/vehicle stamped for downloading, filtering and graphing
• Auxiliary input can be connected to seat switch, seat belt switch, low pressure/hi temp for auto shutdown

Software Required only on units with SM or IM memory boards. Basic 105 units are programmed at the keypad with programmer code.

NOTE: These systems are voltage specific. Be sure to order the correct voltage converter for vehicles with greater than 12v systems.

NOTE: SM (shock/memory module) and IM (internal memory) models include logging capabilities and require PC software. Basic models have the codes manually inputted from keypad with programming code.

Product Options & Accessories

NOTE:
LV = Low Voltage (12v) - standard
MV = Medium Voltage (18vdc - 30vdc)
HV = High Voltage (36vdc - 55vdc)
UHV = Ultra High Voltage (60-80v)