Kit includes:

• Wired relay connects to ignition switch allowing starting from keypad.
• Dash mounted box with green--red dual LED with PCB and RFID reader inside. *RFID reader ---inside box - specify type: S=Standard 125KHZ, H=HID-Prox type

Product Downloads:

PowerPoint	VIEW POWERPOINT
Schematics	VIEW SCHEMATICS/PDF
Product Details	VIEW BROCHURE/PDF

Features:

• Programmer's card can program in 1000 cards into any device
• RFID card reader enables device for a programmed # of hours (default is 12 hours)
• Wired relay enables ignition system and golf cart is driven in normal manner (just pressing on accelerator)
• Keys are totally eliminated, because the device is automatically disabled after hours, chances of theft, vandalism and joy riding damage is significantly reduced (cart can NOT be started with key)
• Auxiliary connection to automatically shut down ignition in 1 minute if not connected: Connects to either: power to disable function), seat belt switch, low pres/high temp engine, seat switch

How it works:

• Operator flashes RFID Card over box, if authorized the LED on box will light green (red if not accepted).
• 12 hours (default) later, the LED goes red on box and ignition system is disabled
• Programmer can disable the device IMMEDIATELY by re-swiping RFID card
• If programmer re-swipes card again----device will re-enable again for 12 hours (default).

RFID options:

• Credit card type
• Keychain FOB type
• Coin sized adhesive tag type (turns any plastic card into RFID card

NOTE: These systems are voltage specific. Be sure to order the correct voltage converter for vehicles with greater than 12VDC, MVC 24VDC, HVC 36--48VDC.

Product Options & Accessories

NOTE:
LV = Low Voltage (12v) - standard
MV = Medium Voltage (18vdc - 30vdc)
HV = High Voltage (36vdc - 55vdc)
UHV = Ultra High Voltage (60-80v)